STACOR UR
Single-component urethane-alkyd primer-enamel with active anti-corrosion pigments and fast drying. For atmospheric corrosivity categories C1–C4 to ISO 12944-2.
-
Single-component urethane-alkyd primer-enamel with active anti-corrosion pigments and fast drying time. The coating has high stability of properties and a long service life.
-
— For corrosion protection of metal structures of various functional purposes at industrial and infrastructure facilities operating under atmospheric corrosivity from very low C1 to high C4 (ISO 12944-2).
— high solids content
— low material consumption
— fast drying
— availability of a wide range of colours (according to RAL)
— Good colour and gloss retention
— easy application
— made in Uzbekistan
-
as a standalone single-layer coating for steel indoors or as a durable multi-layer coating for surfaces exposed to the atmosphere, e.g. metal structures, pipelines, fences, railings, machinery and equipment. Also as an enamel for application over alkyd, alkyd-modified and acrylic primers and compatible coatings of other types.
Particularly suitable for application in factory conditions.
-
Purpose One-component primer-topcoat for steel, stainless steel, aluminium and galvanized surfaces: stand-alone monolayer coating indoors, topcoat for atmospheric exposure, repair of old coatings Type One-component urethane-alkyd primer-topcoat with active anti-corrosion pigments Colour Grey or according to the RAL catalogue Packaging 25 kg (net), one-component material Mixing ratio no mixing required, the material is supplied ready to use Density approx. 1.20 g/cm³ Dry residue by volume 60 ± 3 % Dry film thickness 50 µm per coat Wet film thickness 84 µm per coat Theoretical consumption 0.100 kg/m² at a dry film thickness of 50 µm Surface preparation steel — abrasive blast cleaning to Sa 2½ according to ISO 8501-1 (Sa 2, St 2 also permissible); galvanized steel, stainless steel and aluminium — light sweep blasting with a non-metallic abrasive according to ISO 12944-4 Application method brush, roller, air and airless spray Thinner xylene, solvent R-12, solvent R-4 Dilution generally not required, up to 5 % by weight is permissible Next coat after 4 hours at +10 °C, 2 hours at +20 °C, 30 minutes at +60 °C Application temperature from 0 °C to +50 °C; down to −10 °C is possible, drying time increases Relative humidity 30…80 % during application Dew point substrate temperature at least 3 °C above the dew point Shelf life 12 months from the date of manufacture in tightly sealed packaging at −40…+40 °C -
Stacor UR Technical Data Sheet — PDF, revision 09.2026
Техническая инструкция, Russian version — PDF
The document covers the material description, fields of application, surface preparation, mixing ratio, consumption, application conditions and drying times.